To Next PageTo Next Page
Need help?Do you have a question about the Merits S941 and is the answer not in the manual?
Read and follow all instructions, warnings, and notes before operating the product for the first time.
Do not modify your scooter or change programmed parameters. Use only approved accessories.
Perform a safety check before each use to ensure smooth and safe operation.
Maintain proper tire pressure (35psi/2.4 bar) for control and to prevent tire bursts.
Stay within the specified weight capacity to avoid warranty voidance and damage.
Drive straight up/down inclines, use slow speed, avoid hazardous surfaces, and never use freewheel mode on inclines.
Do not attempt to negotiate curbs higher than 1.6in (0.4cm) to prevent tipping.
Scooter uses maintenance-free sealed lead acid batteries. Charge fully before first use.
Steps to charge batteries: connect charger, plug into outlet, charge for 8-14 hours.
Do not use extension cords, remove grounding prong, or allow unsupervised children.
Read manual and charger instructions before charging. Inspect charger for damage.
Check connections, ensure cables are secure, and power cord is fully inserted.
Steps for safe mounting: remove key, disengage seat rotation, secure seat, position feet.
Hold tiller, feet on floorboard. Use speed dial and throttle lever for control. Stop by releasing throttle.
Avoid actions affecting steering/stability: leashes, passengers, hanging items, towing/pushing.
Steps for safe dismounting: stop, remove key, rotate seat, secure seat, exit safely.
Scooter displays fault codes for basic troubleshooting. Codes indicate battery issues, brake faults, etc.
Check key position, battery charge, circuit breaker, harness connections, and timer feature.
Ensure freewheel lever is in drive position. Push lever rearward and cycle power.
Charge batteries more frequently. Contact dealer for battery load testing or service.
Fully charge batteries and have them load tested by dealer or yourself.
General
