LCD Setting procedure
A. Key switch off.
B. Keep pressing both head light button and half speed button for 3 seconds and key
switch on
C. Release both head light button and half speed button, the display is now in setting
mode.
D. Press hazard light button once at a time to choose the item you want to set.(The
items are AM/PM, hour, minute, °C/°F, km/mile and kph/mph.)
E. Press left indicator button or right indicator button to change the setting.
F. Leave all buttons for more than 5 seconds, the display will automatically go back
to drive mode and store the settings.
To Next Page
Loading...
