Page 4 For technical questions, please call 1-888-866-5797. Item 58547
SAFETY OPERATION MAINTENANCESETUP
Specifications
Operating Pressure 0 -200 PSI
Max Temperature 150° F (regulator)
Air Inlet and Outlet Size
Inlet: 1/2" -14 NPT (female thread)
Outlet: 1/4"-18 NPT (male thread)
Features Replaceable air filter element
Filter 5 micron, for particles and water
Installation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Note: This air tool may be shipped with protective plugs covering the air ports. Remove these plugs before set up.
TO PREVENT SERIOUS INJURY FROM EXPLOSION:
Use only clean, dry, regulated, compressed air to power this tool.
Do not use oxygen, carbon dioxide, combustible gases,
or any other bottled gas as a power source for this tool.
Functions
Regulator
Handle
Regulator
Air Outlet
Tank
Gauge
Filter/Regulator Valve
Air Inlet
Shut Off Valve
To Next Page
Loading...