PowerGuard
PRO
User & Installation Guide Rev A Page 3
Precautions
• This product is designed for use in 12Volt DC and 24Volt DC
vehicular systems depending on model. Use in other than its
designed application may result in fire, electric shock or other
injury.
• DO NOT disassemble, modify or alter. Doing so may result in an
accident, fire or electric shock.
• USE ONLY in vehicles with a NEGATIVE GROUND. Failure to do
so may result in fire, electric shock, damage or other injury.
• FUSES: Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire, injury, electric shock or
damage.
• DO NOT install or operate the CPU in an explosive atmosphere.
• DO NOT install or expose the CPU to excessive temperatures or
humidity.
• If in any doubt consult a suitably qualified and competent
engineer or the supplier.
• DO NOT substitute Contactors or switches with any other types
that have not been approved and tested.
• MAINTENANCE. If you have problems or suspect device failures
DO NOT attempt to repair the unit yourself. Return it to your
Dealer or Merlin for servicing.
To Next Page
Loading...