EasyManua.ls Logo

Merlin SilentDrive MR650EVO User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MR850EVO/MR650EVO
Rolling Garage Door Opener
Installation and Operating Instructions
Owners Copy: Please keep these instructions for future reference
This manual contains IMPORTANT SAFETY information
DO NOT PROCEED WITH THE INSTALLATION BEFORE READING THOROUGHLY
www.go-merlin.com
Question and Answer IconNeed help?

Do you have a question about the Merlin SilentDrive MR650EVO and is the answer not in the manual?

Merlin SilentDrive MR650EVO Specifications

General IconGeneral
BrandMerlin
ModelSilentDrive MR650EVO
CategoryGarage Door Opener
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

CARTON INVENTORY

TOOLS REQUIRED

DOOR REQUIREMENTS

TESTING THE DOOR

INSTALLING THE STOP COLLAR

INSTALLING THE WEIGHT BAR

THE RELEASE HANDLE & CORD

OPERATING THE MANUAL RELEASE

PINNING THE DOOR

ATTACHING EXTENSION POLES

LEFT/RIGHT HAND INSTALLATION

INSTALLATION PROCEDURE

SETTING LIMITS AND OPERATION

Setting Right or Left Hand Operation

Configures the opener for correct installation side, ensuring proper directional control of the garage door.

Setting the Open (UP) Limit

Establishes the fully open position for the garage door, ensuring adequate clearance.

Setting the Bottom (DOWN) Limit

Defines the fully closed position for the garage door, preventing excessive force upon contact with the floor.

Setting the FORCE

Calibrates the opener's force sensitivity to ensure safe and effective door operation.

TESTING THE SAFETY REVERSE SYSTEM

FIXING WARNING LABELS

INSTALL THE PROTECTOR SYSTEM (IR BEAMS)

Installing and Adjusting the Protector System

Guides the installation and alignment of IR beams for enhanced safety during door operation.

INSTALLING WIRELESS WALL BUTTON

WIRELESS PROGRAMMING

KEYLESS DEVICE PROGRAMMING

Setting the Keyless Entry PIN

Procedure to set a personal identification number for the wireless keypad entry system.

Changing an Existing Keyless Entry PIN

Steps to modify the existing PIN for the wireless keypad entry system.

OPERATION OF YOUR OPENER

CARE OF YOUR OPENER

MAINTENANCE OF YOUR OPENER

SPECIFICATIONS MR850EVO

SPECIFICATIONS MR650EVO

ACCESSORIES

TYPICAL WIRING DIAGRAM

SPECIAL FEATURES

SPARE PARTS

DIAGNOSTIC CHART

Diagnostic Codes 1-1 to 1-5

Troubleshooting codes and their possible causes/resolutions for opener faults, covering initial diagnostic checks.

TROUBLESHOOTING

Related product manuals