2
Light Indicator Status:
FAQ:
Q) Can’t find the headphones in the Bluetooth list?
A) Please make sure your headphones are not connected with any
other devices before searching the headphones from Bluetooth
settings. If it is connected with other device, either switch off the
Bluetooth of the connected device or clear the pairing in the
earphones by press and hold the Touch key for 10 seconds.( Before
try to clear pairing make sure headphones are switched off)
Q) Can’t turn on the headphones?
A) Make sure both headphones are fully charged.
Maintenance:
1.Retain these instructions for future use.
2.Clean the product with a damp cloth and mild soap.
3.Be careful not to turn or twist the cables used in this product too
much as it can lead to malfunction and failure.
4.This product is not designed to be submerged in water and will
malfunction if this occurs.
5.This product has no user serviceable items inside. Do not open
this product as the user risk injury and would void the warranty.
6.Keep unit away from strong magnetic fields to avoid interference
with the product.
Earphone Mode Status of indicator
ON Green light is on for 1
second
OFF Red light is on for 1 second
Standby No light
Connect again No light
Earphone pairing state Red and green lights flicks
alternatively
Earphone charging state Red light is on
Earphone is fully charged No light
Charging box is fully
charged
3 LED lights are on
To Next Page
Loading...
