your local council office or your household waste
disposal service.
THE SAFETY STAND MUST BE USED AT ALL
TIMES ON HEAT RESISTANT SURFACES. STRAND
TEST BEFORE USE.
LIMITED 2 YEAR GLOBAL WARRANTY
Mermade Hair warrants this product against any
defects that are due to faulty material or
workmanship for a two-year period from the original
date of consumer purchase. This warranty does not
include damage to the product resulting from
accident or misuse. If the product should become
defective within the warranty period, Mermade Hair
will replace item. Email returns@mermadehair.com
for Warranty issues and provide the batch code found
on the power cord.
This warranty does not cover products damaged by
the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Wrapping cord around appliance causing
premature wear & breakage
• Any other conditions beyond our control
MERMADE HAIR SHALL NOT BE RESPONSIBLE FOR
ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO IMPLIED WARRANTIES OF
FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO TWO YEARS FROM DATE OF ORIGINAL
PURCHASE. KEEP ORIGINAL SALES RECEIPT AS PROOF
OF PURCHASE FOR WARRANTY PURPOSES OR
REGISTER YOUR WARRANTY ONLINE.
This warranty gives you specific legal rights and you
may also have other rights which vary from state
to state or province to province. Some states do not
allow that exclusion or limitation of incidental,
special, or consequential damages.
REGISTER YOUR WARRANTY AND REVIEW
INSTRUCTIONS HERE: https://qrco.de/bbSv60
HOW TO USE YOUR MERMADE PRO WAVER
STEP ONE: Hair should be clean, dry and free of
tangles before using. Rest the iron on its stand on a
smooth, heat-resistant flat surface, and plug it in.
Press and hold the ON/OFF button until the unit turns
on and the on indicator lights up. Adjust the
temperature using the left and right buttons to reach
your desired heat. For healthier styling we suggest
using 180°C/360°F heat setting.
STEP TWO: Start by dividing hair into sections.
Smaller sections will create more defined waves.
Spray each section liberally with a heat/thermal
protectant. Taking one section at a time, start at the
top close to the roots and clamp the hair, making sure
that the hair is evenly placed inside the barrels. Be
careful not to touch the scalp with the tool. Hold for
2-5 seconds. Hold for less time if hair is easy to curl,
or if you want less defined waves. Once you have
released your first clamp, re-clamp the top barrel of
waver on to the last wave bend. You want to overlap
each wave with your waver to create a seamless wave
from roots to ends. Repeat this process through to
the ends over the whole head.
STEP THREE: Once you have finished waving, make
sure the hair has completely cooled down before
touching to allow it time to set. For a beachy
effortless wave, brush the waves out or comb
through. Finish by using an extra spray of Mermade
Mist for hold and shine, or a flexible workable spray
or a lacquer spray for more hold.
STEP FOUR: To turn off, press and hold down the
power off button until it reads ‘OFF’. For your safety,
the tool will auto shutoff after 60 minutes. Allow tool
to cool down completely before stowing away. Make
sure to wipe down the tool after use to avoid product
build up on tool.
HOW TO HOLD THE WAVER
You can hold the Mermade Waver in two positions.
Both create the same wave, however users may have
their own preference for ease of styling.
FLIPPED POSITION: Your thumb is on the soft-touch
handle and the safety stand is facing outward.
Holding the waver in this flipped position will allow
for easier self-styling as you can see the hair through
the barrels so you can clamp each wave seamlessly. It
also means the first wave goes downward creating a
very natural look.
To Next Page
Loading...