16
Installation and Operating original instructions.
Part Number 32Z3797 GB
Issue 1
OPERATION & CONTROLS
1
1
2
2
3
5
3
4
1 2 3
To nd the required Program in the cookbook.
1. Select ‘COOKBOOK’ from the main menu screen.
2. Select the ALL MENUS symbol.
3. Use scroll up/down arrows to nd the program.
NOTE: if an image has a red line around it the oven
temperature is set too high or too low for that
recipe. See ‘CHANGING THE OVEN TEMPERATURE’.
Taking all the necessary precautions to ensure you
do not burn yourself, place the food product into
the hot oven cavity and close the door.
Change the
order of a
selected item
shown in the
Press & Go
screen.
Move a
selected item
to or from the
Press & Go
screen.
Select to scroll
a list up or
down.
PRESS & GO
Running a cooking program from the Press &
Go menu.
1. Select ‘PRESS & GO’ from the main menu screen.
2. Select the item required to cook.
3. The display shows the temperature, cooking
time, microwave power and fan speed while the
timer counts down. The timer bar turns red to
indicate the cooking cycle has nished.
WARNING: ENSURE THERE IS FOOD
PRODUCT IN THE OVEN BEFORE
STARTING A COOKING PROGRAM.
WARNING:
HOT SURFACE HAZARD
USING A COOKBOOK PROGRAM
Choosing which cooking programs are shown in
the ‘PRESS & GO’ menu screen.
1. After selecting ‘PRESS & GO’ from the main menu
screen, select the EDIT symbol.
2. Two lists are displayed, the ‘PRESS & GO’ menu
items are shown in the upper list and the lower list
shows other menu items which are available. Both
lists can be scrolled up or down using the arrows
on the extreme right.
3. Select an item, then choose whether to change
its order within the menu or to remove it into the
lower list.
4. Select an item to move into the upper list,
making it available in the ‘PRESS & GO’ menu.
5. Select backspace to return to the menu screen
when nished.
To Next Page
Loading...
Need help?
General
