5. Slot#1,EntryDisplay
ñ
Input—0“ todisable EntryDisplay,the numbersentereddonotdisplay.
ñ
Input—1“ toactivate EntryDisplay,the numbersenteredare displayed(W henEntryDisplayis
activated input—*“ before inputting code,andthe numbersentereddonotdisplay).
6. Slot#2,CodeDisplay
ñ
Input—0“ todisable Code Display,the code willnotbe displayedafterthe safe islocked.
ñ
Input—1“ toactivate Code Display,the code isdisplayedfor2 secondsafterthe safe islocked.
7. Slot#3,HideButton
ñ
W henEntryDisplayisactivated,press—*“ before inputting code andthe numbersentereddonot
display. -
ñ
Input—0“ todisable the hide buttonfunction. -
ñ
Input—1“ toactivate the hide buttonfunction. -
8. Slot#4,AuditFunction
ñ
Input—0“ todisable the auditfunction. -
ñ
Input—1“ toactivate the auditfunction. -
9. Slot#5,LockingFunction
ñ
Input—1“ toplace the lockintoStandardLockMode.
IfStandardLockModeisselected
1. The firstcode orcardyouuse tolockthe safe willbe the setcode orcard.
2. Once the code orcardissetyouwillonlyneedtoenter—#“ tolockthe safe.
3. Youwillneedtoenteryoursetcode orswipe yoursetcardtounlockthe safe.
4. Tochange yoursetcode orcardyouwillneedtogobackintothe locksettings.
5. Place the lockfunctionintoHotelLockMode.
6. Gobackintothe locksettings.
7. Place the lockintoStandardLockMode.
8. Now follow step1 under—IfStandardLockModeisselected“. -
ñ
Input—2“ toplace the lockintoHotelLockMode (thisisthe defaultmode). -
10.Slot#6,UnusedSlot
ñ
Input—1“ ifnotalreadyinputted.Thisslotdoesnotdisable oractivate anyfunctions.
11. Input—#“ toconfirm the firstparameterandmove forwardtothe secondsetofsix-digitnumber—#“,
press—#“ againifyoudonotwanttomake anychangestothe secondsix-digitnumber.
12. The secondsix-digitnumber(defaultsettingis—471540“)isnow displayedandslot#1 isblinking .
13. Slot#1,InvalidEntry
ñ
Inputa numberfrom 1-9tosetthe numberoftimesallowedforentering aninvalidcode orcard
before placing the lockintothe —LockOutPeriod“.
14. Slot#2,CodeLength
ñ
Input—3“ tosetthe code lengthtoa 3 digitcode. -
ñ
Input—4“ tosetthe code lengthtoa 4 digitcode. -
ñ
Input—5“ tosetthe code lengthtoa 5 digitcode. -
ñ
Input—6“ tosetthe code lengthtoa 6 digitcode. -
ñ
Input—7“ tosetthe code lengthtoa 3 to6 digitcode -
15. Slot#3and#4,LockOutPeriod
ñ
Inputa numberfrom 00-99tosetthe lengthofthe LockOutPeriod. -
ñ
Example:for5 minutesenter—0“ inslot#3 and—5“ inslot#4. -
16. Slot#5,OverrideFunction(CodeandCard)
ñ
Input—0“ todisable the Override Function. -
ñ
Input—1“ touse the Override Code entryonly,disablesthe Override Card. -
ñ
Input—2“ touse the Override Cardentryonly,disablesthe Override Code. -
ñ
Input—3“ touse the Override Code andCardtogether,inputoverride code thenswipe override card. -
ñ
Input—4“ touse eitherthe Override Code orthe Override Card. -
17.Slot#6,UnusedSlot
ñ
Input—0“ ifnotalreadyinputted.Thisslotdoesnotdisable oractivate anyfunctions.
18.Input—#“ toconfirm the parametersand—GOOD“ appears.
Page 4
http://www.monomachines.com/
http://www.monomachines.com/
To Next Page
Loading...