To Next PageTo Next Page
Need help?Do you have a question about the Metabo HPT C 10FCG and is the answer not in the manual?
General| Type | Compound Miter Saw |
|---|---|
| Blade Diameter | 10 inches |
| Motor | 15 Amp |
| No Load Speed | 5000 RPM |
| Miter Angle Range | 0° - 52° (left and right) |
| Arbor Size | 5/8 inch |
| Bevel Angle Range | 0° - 45° |
Comprehensive safety guidelines applicable to all power tools.
Essential operating instructions and rules to ensure safe use of the power tool.
Identifies and labels the main components of the power tool.
Instructions for securely mounting the power tool to a workbench.
How to operate the switch and use the vise assembly for securing workpieces.
Procedures for releasing the locking pin and attaching accessories.
How to adjust angles and clamp workpieces securely for safe cutting.
Instructions for installing optional holders and stoppers for secure cutting.
How to operate the switch and use the vise assembly for securing workpieces.
Step-by-step guide for performing cutting operations with the saw.
How to set up and perform miter cuts using the turntable.
How to adjust and perform bevel cuts using the saw blade angle.
Steps for performing compound cuts by combining miter and bevel angles.
Specific techniques and settings for cutting crown molding.
Detailed steps for safely installing and removing the saw blade.
Guidance on checking the saw blade, lever, and carbon brushes.
Precautions for motor, screws, and lower guard inspection.
Guidelines for tool storage, lubrication, and general cleaning.
Guidance on where and how to get the tool serviced or repaired.
