Metabo HPT C 7SB3 User Manual

Model
Circular saw
Modèle
Scie circulaire
Modelo
Sierra circular
C 7SB3
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y com-
prenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
00BookC7SB3USmetabo.indb100BookC7SB3USmetabo.indb1 2018/03/2217:56:212018/03/2217:56:21

Metabo HPT C 7SB3 Specifications

General

Power Source	Corded Electric
Motor Power	7.0 Amp
Blade Diameter	6-1/2 inches
Weight	9.7 lbs
Arbor Size	5/8 inches
No-Load Speed	6, 000 RPM
Cord Length	8 ft
No Load Speed	6000 RPM

Summary

Metabo HPT Circular Saw Safety Instructions

Important Safety Information & Warnings

Crucial safety information, signal word meanings, and general power tool warnings.

Circular Saw Specific Safety Warnings

Precautions for safe operation, kickback, and lower guard function.

Specific Safety Rules and Symbols

Detailed rules and symbols for safe saw operation.

Double Insulation for Safer Operation

Explanation of the double insulation design for enhanced electrical safety.

Circular Saw Functional Description and Specifications

Name of Parts Diagram

Illustrated breakdown of all components of the circular saw.

Technical Specifications

Key performance and physical specifications of the power tool.

Circular Saw Assembly and Operation

Applications and Pre-Operation Checks

Intended uses and essential checks before operating the saw.

Adjusting Saw Settings Before Use

Guide to adjusting cutting depth and bevel angle.

Cutting Procedures

Instructions for performing various cutting operations safely.

Saw Blade and Cord Management

Using the Cord Holder

Proper use of the cord holder for managing the power cord.

Mounting and Dismounting the Saw Blade

Detailed steps for safely removing and installing the saw blade.

Maintenance and Inspection of Circular Saw

Saw Blade, Screws, and Carbon Brushes

Checking saw blade, screws, and inspecting carbon brushes.

Lower Guard and Base Adjustment

Maintenance of lower guard and adjusting base for perpendicularity.

Circular Saw Accessories

Standard and Optional Accessories

List and description of included and available accessories.