Metabo LF 724 S User Manual

10 Environmental Protection
Metabo packaging is 100% suitable for
recycling.
Power tools and accessories at the end of
their service life still contain large amounts of
valuable raw materials and plastics which can
likewise be fed back into a recycling process.
Make suitable arrangements for the disposal
of the chips created during operation.
These Operating Instructions are printed on
paper produced in a chlorine-free bleaching
process.
Only for EU countries: Never dispose
of power tools in your household
waste! In accordance with European
Guideline 2002/96/EC on used electronic and
electric equipment and its implementation in
national legal systems, used power tools must
be collected separately and handed in for
environmentally compatible recycling.
11 Technical Specifications
Notes on the details on page 2.
We reserve the right to undertake
modifications to reflect technical advances.
P
1
= rated input
P
2
= output power
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
a
h
= Vibration emission value
(Planing soft wood)
K
h
= Uncertainty (vibration)
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one
tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to
vibration should also take into account the
times when the tool is switched off or when it
is running but not actually doing the job. This
may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
Typical A effective perceived sound levels:
L
pA
= Sound pressure level
L
WA
= Acoustic power level
K
pA/WA
= Uncertainty (sound level)
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
m = weight
Measured values determined in conformity
with EN 60745.
The technical specifications quoted are subject
to tolerances (in compliance with the relevant
valid standards).
ENGLISH
16
02_LF724_S_ENG.qxp:02_LF724_S_ENG 18.05.2011 8:40 Uhr Seite 16

Metabo LF 724 S Specifications

General

Input power	710 W
Output power	400 W
Power source	AC
Chip thickness (max)	28 mm
Idle speed	10000 RPM
Rebating depth	0.3 mm
Soft grip	Yes
Product color	Black, Green

Weight and Dimensions

Weight	2600 g