To Next PageTo Next Page
Need help?Do you have a question about the Metabo MAG 28 LTX 32 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 18 V |
| Maximum drilling depth | 50 mm |
| No-load speed | 0-550 rpm |
| Magnet holding power | 10, 000 N |
| Battery Capacity | 5.2 Ah |
| Drill diameter in steel with core drill max. | 28 mm |
| Torque | 50 Nm |
| Tool Type | Magnetic Core Drill |
| Drill diameter in steel max. | 32 mm |
| Chuck Type | Quick-change chuck |
Steps for initial setup, preparation, and battery pack management.
How to attach and use the securing strap for safe operation.
Instructions for filling and operating the cooling lubrication unit.
How to select gears for different drilling speeds and torque.
Procedures for magnet activation and deactivation.
How to turn the drill motor on and off.
Proper surface preparation and mounting of the drill.
Steps and precautions for the drilling process.
Specific instructions for inserting and removing Morse taper shank MK2 tools.
Specific instructions for inserting and removing Weldon shank 19 mm tools.
How to adjust the slide plate backlash.
