To Next PageTo Next Page
Need help?Do you have a question about the Metabo BST 9.6 and is the answer not in the manual?
General| Brand | Metabo |
|---|---|
| Model | BST 9.6 |
| Category | Power Tool |
| Language | English |
Statement of product conformance to specified standards and directives.
Defines intended use for drilling, driving screws, tapping threads, and impact drilling.
Advises reading safety instructions and keeping related documents safe.
Highlights specific safety advice marked with a warning symbol.
Refers to page 3 for a diagram identifying tool parts and features.
Details the Metabo impulse mode for driving screws and drilling tasks.
Instructions for removing, replacing, and charging the battery pack.
How to set rotation direction and engage the transport safety lock.
Guide on choosing between 1st and 2nd gear for speed and torque control.
How to adjust torque settings and select drilling modes.
Instructions for activating or deactivating the impulse mode feature.
How to operate the trigger switch for power and speed control.
Instructions for opening the chuck and securely clamping drill bits.
Method to clean accumulated dust from the chuck.
Advice for effective drilling, driving screws, and tapping threads.
Guidance on using and selecting correct original Metabo accessories for the tool.
Information on authorized repairs and how to report faults.
Notes on packaging recycling, battery disposal, and paper sourcing.
Details on voltage, speed, torque, bit sizes, weight, and spindle thread.
Information on acoustic pressure/power levels and hand/arm acceleration.
