Metabo MIG MAG 170/30 XTC User Manual

115 171 4591 / 0506 - 2.3
Betriebsanleitung. . . . . . . . . . . . . . . . . . . . .3
Operating Instruction . . . . . . . . . . . . . . . . .11
Instructions d'utilisation . . . . . . . . . . . . . . .19
Handleiding . . . . . . . . . . . . . . . . . . . . . . . .28
MIG MAG 165 SP
MIG MAG 150/20 XT
MIG MAG 170/30 XTC
MIG MAG 200/40 XT
MIG MAG 250/60 XT
MIG MAG 300/45 XT

Metabo MIG MAG 170/30 XTC Specifications

General

Input Voltage	230 V
Welding Current Range	30 - 170 A
Maximum Welding Current	170 A
Suitable Wire Thickness (steel)	0.6 - 0.8 mm
Suitable Wire Thickness (aluminium)	0.8 - 1.0 mm
Wire Diameter (MIG/MAG)	0.6 - 1.0 mm
Mains Frequency	50/60 Hz
Protection Type	IP 21S
Protection Class	I

Summary

Operating Elements

Control Panel

MIG/MAG 150/20 XT

MIG/MAG 165 SP

MIG/MAG 170/30 XTC

MIG/MAG 200/40 XT, MIG/MAG 250/60 XT, MIG/MAG 300/45 XT

Preparing for Operation

Connecting the Gas Cylinder

Mains Connection

Details the electrical safety requirements and procedures for connecting the machine to the mains power supply.

Installing the Wire Spool

Threading the Electrode Wire

Step-by-step guide on how to thread the electrode wire through the feed unit and torch assembly.

Operation

Setting the Welding Parameters

Describes how to adjust wire feed speed and welding current/voltage for optimal welding.

Maintenance

Gas-shielded Arc Welding

Comprehensive guide covering setup, parameters, and procedures for gas-shielded arc welding.

Repairs

Faults

Trouble Shooting

Provides a guide to diagnosing and resolving common issues like irregular wire feed or no welding current.

Technical Specifications