Metabo NR83A5 User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
Model
Modèle
Modelo
NR 83A5
NR 83A5 (S)
NR 83AA5
Nailer
Cloueur
Clavador
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la
mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance du
manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o
en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
NR83A5
(with depth adjustment)
NR83A5 (S)
(without depth adjustment)
NR83AA5
000BookNR83A5USmetabo.indb1000BookNR83A5USmetabo.indb1 2018/05/2213:58:532018/05/2213:58:53

Metabo NR83A5 Specifications

General

Type	Framing Nailer
Power Source	Pneumatic
Fastener Range	2" to 3-1/4"
Operating Pressure	70-120 PSI
Air Inlet	1/4" NPT
Fastener Type	Nails
Nail Size	2 in - 3-1/4 in
Nail Diameter	0.113" - 0.131"
Magazine Angle	21°
Length	12.6"

Summary

Metabo HPT Nailer Safety Guidelines

IMPORTANT SAFETY INFORMATION

Defines hazard signal words and provides general safety warnings for nailer operation.

KEY SAFETY INSTRUCTIONS

Crucial safety rules for nailer operation, including eye protection and trigger control.

SAFE HANDLING AND RECOIL MANAGEMENT

Nailer Operation and Setup

SPECIFICATIONS

Provides detailed technical specifications for different Metabo HPT nailer models.

NAIL SELECTION GUIDE

Guidance on selecting the correct type, size, and collation of nails for the nailer.

TESTING THE NAILER

ADJUSTING AIR PRESSURE

Guide on setting the correct air pressure for optimal performance and safety.

LOADING NAILS

Step-by-step instructions for loading nails into the magazine for NR83A5 models.

NAILER OPERATION MODES

ADJUSTING NAILING DEPTH