Metabo SB EDV 1000-2 S - User Manual

Verify mains voltage matches the tool's rating plate before operation.

Explains the double insulation feature and its safety implications.

Proper use of the front grip and depth gauge for accurate drilling.

Switch between impact and rotary-only drilling modes.

How to change between the two speed settings using the reduction gear.

Adjusting the forward/reverse rotation direction lever.

Instructions for inserting and securing drill bits in the chuck.

Essential safety tips, including workpiece securing and hazard checks.

Guide for inserting screwdriver bits and sockets into the drill.

How to interpret the symbols and readouts on the display panel.

Enter specific RPM values using the entry keyboard.

Details on speed limits and torque for reverse operations.

Using the trigger for smooth starting and variable speed control.

Program drill speed based on material and bit diameter.

How the tacho-generator maintains consistent speed under load.

Setting the torque level for precise fastening.

Recommended settings for torque and speed for metric screws.

Guidance for selecting torque for various wood types and screw depths.

Procedure for using the drill to remove screws in reverse.

Recommended settings for performing tapping operations.

Using the 'C' key to cancel entries or switch between functions.

Explanation of mechanical and thermal overload protection features.

Step-by-step guide for replacing worn carbon brushes.

Recommendations for cleaning, inspection, and professional servicing.

Essential safety warnings and precautions for electric tool use.