To Next PageTo Next Page
Need help?Do you have a question about the Metabo SBE 705 and is the answer not in the manual?
Details requirements for grounded and double insulated tools for safe operation.
Guidelines for operator alertness, attire, and safe handling practices.
Instructions for proper tool usage, maintenance, and accessory selection.
Details on safety clutch, auto-stop brushes, impulse, contact, torque limiters, and restart protection.
Instructions for attaching and positioning the side handle for safe operation.
How to adjust the depth stop for precise drilling depth.
Procedure for starting, stopping, and continuous operation of the tool.
Setting the maximum speed using the preselection wheel.
How to change between the two gears for different torque/speed requirements.
Selecting between drilling and hammer drilling modes.
How to change the tool's rotation direction (clockwise/counter-clockwise).
Step-by-step guide for changing tools using the Futuro Top chuck.
Instructions for inserting and removing tools with the Futuro Plus keyless chuck.
Method for fitting and tightening tools using a geared chuck.
How to enable/disable and indicators for the contact mode safety feature.
Adjusting the pulse function for screwdriving or drilling.
Setting the torque limiter to prevent over-tightening.
Procedure for removing the Futuro Top keyless chuck.
Instructions for removing the Futuro Plus keyless chuck, including locking screw.
Method for removing a geared chuck using a chuck key and mallet.
Guide for cleaning keyless chucks to remove dust and debris.
Explanation for rapid flashing indicator related to restart protection.
Meaning of slow flashing indicator for worn carbon brushes.
Indicator for overload condition and steps to cool down the motor.
Details requirements for grounded and double insulated tools for safe operation.
Guidelines for operator alertness, attire, and safe handling practices.
Instructions for proper tool usage, maintenance, and accessory selection.
Details on safety clutch, auto-stop brushes, impulse, contact, torque limiters, and restart protection.
Instructions for attaching and positioning the side handle for safe operation.
How to adjust the depth stop for precise drilling depth.
Procedure for starting, stopping, and continuous operation of the tool.
Setting the maximum speed using the preselection wheel.
How to change between the two gears for different torque/speed requirements.
Selecting between drilling and hammer drilling modes.
How to change the tool's rotation direction (clockwise/counter-clockwise).
Step-by-step guide for changing tools using the Futuro Top chuck.
Instructions for inserting and removing tools with the Futuro Plus keyless chuck.
Method for fitting and tightening tools using a geared chuck.
How to enable/disable and indicators for the contact mode safety feature.
Adjusting the pulse function for screwdriving or drilling.
Setting the torque limiter to prevent over-tightening.
Procedure for removing the Futuro Top keyless chuck.
Instructions for removing the Futuro Plus keyless chuck, including locking screw.
Method for removing a geared chuck using a chuck key and mallet.
Guide for cleaning keyless chucks to remove dust and debris.
Explanation for rapid flashing indicator related to restart protection.
Meaning of slow flashing indicator for worn carbon brushes.
Indicator for overload condition and steps to cool down the motor.
General| Power | 705 W |
|---|---|
| No-load Speed | 0 - 2800 rpm |
| Chuck Type | Keyless chuck |
| Chuck Capacity | 1.5 - 13 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 30 mm |
| Output Power | 350 W |
| Collar Diameter | 43 mm |
| Spindle Thread | 1/2" - 20 UNF |
| Cable Length | 2.5 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Impact Rate | 0-44800 bpm |
| Maximum Impact Rate | 44800 bpm |
