To Next PageTo Next Page
Need help?Do you have a question about the Metabo UHE 28 Multi and is the answer not in the manual?
General| Power source | Corded Electric |
|---|---|
| Chuck type | SDS-Plus |
| Impact energy | 3.1 J |
| Max. drilling diameter in concrete | 28 mm |
| Max. drilling diameter in steel | 13 mm |
| No-load speed | 0 - 1100 rpm |
| Cable length | 4 m |
| Sound power level | 101 dB(A) |
| Chuck capacity | 1.5-13 mm |
Declares product conformity to specified standards and directives.
Outlines the intended use of the rotary hammer drill with accessories.
Provides essential safety instructions and documentation guidelines.
Highlights critical safety precautions for user and tool protection.
Identifies key parts and controls of the Metabo power tool.
Details unique functionalities like chuck exchange, mode control, safety clutch, and indicators.
Instructions for initial setup including side handle installation and power connection checks.
How to set the depth stop and operate the tool's on/off trigger.
Adjusting speed, selecting operating modes, and changing rotation direction.
Procedures for changing the drill chuck and inserting/removing SDS tools.
Advice for optimizing performance and drilling deep holes.
Steps for cleaning the keyless chuck and vent slots.
Explains LED indicators for restart protection, brush wear, and overload.
Lists types of accessories compatible with the power tool.
Guidelines for electrical tool repairs and service center referrals.
Information on packaging recyclability and material usage.
Details key technical data, performance ratings, and sound levels.
