Need help?Do you have a question about the Metapace S-52 and is the answer not in the manual?
Restores scanner settings to factory defaults or previously saved custom defaults.
Configures manual trigger operation, reading times, and return delays.
Sets up automatic scanning for continuous reading, including interval and delay times.
Configures automatic scanning based on environmental changes, including aiming and sensitivity.
Manages volume, frequency, read sound duration, and successful read beeps.
Manages the activation and deactivation of all, 1D, and 2D barcode symbologies.
Configures EAN-8 parameters, including conversion and add-on codes.
Configures EAN-13 parameters, including ISBN/ISSN translation and add-on codes.
Configures UPC-E parameters, including add-on codes and country code settings.
Configures UPC-A parameters, including add-on codes and country code settings.
General| Weight | 150 g |
|---|---|
| Connectivity | Wired |
| Protection Class | IP54 |
| Scanning Technology | Laser |
| Resolution | 4 mil |
| Operating Voltage | 5 V DC |
| Operating Current | 100 mA |
| Interface | USB |
| Supported Barcodes | 1D |
To Next Page
