EN | Care and maintenance
22
7.2.2. Disposal of the collection container
The full collection container can be returned to the company‘s own disposal organisation, METASYS logistics & collection GmbH GmbH.
Retaintheconrmationofdisposalinaccordancewithstatelaw.
When the complete device is disassembled at the end of its service life, it can be returned to the manufacturer for correct disposal (see 8.2. Recycling and disposal).
1
Pour disinfectant (10 ml GREEN&CLEAN M2) for suction systems into the full amalgam collection
container.
GREEN
&CLEAN
M2
COMPACT Dynamic 10 ml
2
Close the full collection container with the green lid by turning it clockwise.
Carry out a leak test by placing the closed collection container upside down over a collection receptacle.
If necessary, close the cover tightly again.
max 100%
95%
METASYS
MULTI SYSTEM TYP 1
4
Place the properly sealed collection container in the 2 polystyrene half cups and then place it in the
transport box.