EasyManua.ls Logo

Meteo Control COMFORT - User Manual

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WEB'log Comfort 110621 - en
WEB'log
COMFORT
Operating Instructions

Questions and Answers

  • D
    David Graves Jr.Jul 31, 2025
    How to troubleshoot 'No inverter found' on Meteo Control Weather Station?
    • G
      gaylarryAug 1, 2025
      If the Meteo Control Weather Station displays 'No inverter found', ensure the inverters are powered on during the scanning process. Verify the bus cabling and confirm a suitable data cable is being used. Check that the bus address is correctly set in the inverter, according to the manufacturer's specifications. Inspect the terminator to prevent signal reflections and ensure the shield of the bus cabling is properly connected. Also, check the interfaces of the inverters.
  • C
    Courtney SimmonsAug 6, 2025
    What to do if Meteo Control COMFORT Weather Station has no IP address assigned by DHCP server?
    • P
      peggycampbellAug 6, 2025
      If your Meteo Control Weather Station isn't getting an IP address from the DHCP server, first check the network connection. After establishing a network connection, restart the device. If a DHCP server isn't available on the network, configure the network settings manually.
  • G
    Gabriel JuarezAug 12, 2025
    Why internet connection via cable does not work on Meteo Control COMFORT?
    • M
      megan98Aug 12, 2025
      The Meteo Control Weather Station requires an internet connection via a router. It cannot be directly connected to a cable modem.
  • A
    Andrew TapiaAug 18, 2025
    What to do if the energy meter is not detected on Meteo Control COMFORT?
    • K
      kylieduranAug 18, 2025
      If the energy meter is not detected by the Meteo Control Weather Station, check the cabling, paying attention to the polarity. Ensure that the digital input is active and that the pulse constant has been correctly entered.
  • K
    Katherine PriceAug 25, 2025
    What to do if Meteo Control COMFORT sends no data or alarms via telephone connection?
    • J
      Jasmine CaseyAug 25, 2025
      If the Meteo Control Weather Station is not sending data or alarms via the telephone connection, first check the functionality of the telephone connection using a standard telephone. Ensure that the connection does not have any dialing restrictions, such as premium-rate numbers being blocked. If necessary, remove any dialing restrictions or try using a different internet provider.

Summary

Safety Instructions

Overview of the Device

Assignment of Connections

RS485; RS422 Interfaces

Pin assignments for RS485 and RS422 communication interfaces.

Installation

Safety Instructions for Installation

Crucial safety warnings and precautions for device installation.

Cables and Wiring

Device Installation and Removal

Interfaces

Analog Input Configuration

Digital Input Configuration

Power Supply

Bus Communication

General Connection Diagram

Start-up and Configuration

Configuring the WEBlog Comfort

Initial setup and configuration of the WEB'log Comfort.

Local Configuration on Touch Screen

Performing configuration directly on the device's touch screen.

Setting Network Parameters

Dynamic Addressing in the LAN

Guided Configuration via Web Browser

Expert Configuration via Web Browser

Registering WEBlog Comfort on Portal

Registering WEBlog Comfort Online

Operation

Own Consumption

Troubleshooting

Technical Data

Meteo Control COMFORT Specifications

General IconGeneral
BrandMeteo Control
ModelCOMFORT
CategoryWeather Station
LanguageEnglish