METHVEN SATINJET User Manual

www.methven.com
SATINJET
®
OVERHEAD SHOWER/ARM
Installation Guide
Technical Specifications:
Operating Temperature:
Hot: Max 60°C*
Cold: Min 5°C
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
Inlet Connections:
All ½" BSP
Operating Pressure:
Min: 35kPa/0.35bar
Max: 500kPa/5bar*
Optimum: 35kPa/0.35bar
- 500kPa/5bar
Operating Pressure:
Min: 35kPa/0.35bar
Max: 500kPa/5bar*
Optimum: 35kPa/0.35bar -
500kPa/5bar
SHOWER ARMS OVERHEAD SHOWERS

METHVEN SATINJET Specifications

General

Brand	METHVEN
Model	SATINJET
Category	Kitchen & Bath Fixtures
Language	English

Summary

Technical Specifications

Operating Temperature

Specifies the maximum operating temperature for hot water and the minimum for cold water.

Inlet Connections

Details the type of water inlet connections required for the shower system.

Shower Arms

Operating Pressure (Shower Arms)

Defines the minimum, maximum, and optimum operating pressure ranges for shower arms.

Overhead Showers

Operating Pressure (Overhead Showers)

Defines the minimum, maximum, and optimum operating pressure ranges for overhead showers.

General Installation Requirements

Installation Notes

Provides essential notes on ensuring a watertight seal and using plumber's tape on connections.

Care and Cleaning

Cleaning Instructions

Advises on cleaning methods, avoiding abrasives, and preventing limescale buildup on shower surfaces.