To Next PageTo Next Page
Need help?Do you have a question about the Metra Electronics 95-7331 and is the answer not in the manual?
General| Color | Black |
|---|---|
| Compatible with | ISO DDIN radios |
| ISO DDIN radio provision | Yes |
| Painted scratch-resistant matte black | Yes |
| Manufacturer | Metra Electronics |
| Part Number | 95-7331 |
| Product Type | Dash Kit |
| Material | Plastic |
| Type | Dash Kit |
Steps to disconnect the vehicle battery and remove the shift knob and surrounding panel.
Instructions for removing the center console, cup holders, and securing bolts.
Steps to unclip and remove rear trim, side panels, and securing screws from the center console.
Instructions for removing securing screws and unplugging the factory radio unit.
Snap the original switches into the new radio housing in their original locations.
Snap the Double DIN brackets onto the inside edge of the provided Radio Housing.
Slide the Double DIN Radio or stacked ISO Mount units into the assembly and secure with screws.
Details on making wiring connections using EIA color code and recommended methods.
Reassemble dash components in reverse order and test the installed unit.
