Metra Electronics 95-9012 User Manual

INSTALLATION INSTRUCTIONS FOR PART 95-9012
95-9012
KIT FEATURES
• Double DIN Head Unit Provision
• Stacked ISO DIN Head Unit Provision
A) Radio Housing • B) (8) Phillips screws
KIT COMPONENTS
A
• Small Flat Blade Screwdriver • Panel Removal Tool
• 86-9001 Radio Removal Tools (2 sets)
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
• 70-1784 VW harness 1998-2001
• XSVI-9003-NAV VW Interface 2003-up
Antenna adapter:
• 40-EU55-adapter for amplified antenna 2002-up
• 40-VW53 adapter for amplified antenna 1998-01
•GOLF 1999-2006
•GTI 1999-2005
•JETTA 1999-2005
(Excluding NEW JETTA 2005)
•PASSAT 2000-2005

Metra Electronics 95-9012 Specifications

General

Product Type	Dash Kit
Color	Black
Material	Plastic
DIN Compatibility	Single DIN
ISO Compatibility	Yes
Application	Radio Replacement
Brand	Metra Electronics
Part Number	95-9012
Installation Type	Dash

Summary

Product Overview and Applications

Vehicle Applications

Lists vehicle models compatible with the installation kit, including Golf, GTI, Jetta, and Passat.

Kit Features and Components

Details the kit's provision for Double DIN and Stacked ISO DIN units and lists included components.

Required Accessories and Tools

Specifies necessary wiring harnesses, antenna adapters, and tools for installation.

Dash Disassembly Procedure

Safely Removing the Factory Radio

Instructions for disconnecting the battery and using tools to remove the original radio and dash tray.

Kit Assembly and Final Installation

Mounting and Connecting the New Head Unit

Steps to slide the DDIN unit into the housing, secure it, connect wiring, and snap into the dash.