Metra Electronics 99-3309B-LC User Manual

METRA. The World’s best kits.
™
metraonline.com
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 7/27/2016 INST99-3309B-LC
Installation instructions for part 99-3309B-LC
CAUTION! All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black to match the factory dash
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
• E) (10) White plastic panel clips • F) Axxess Interface included (not shown)
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Axxess Interface included
Antenna Adapter: • 40-EU55
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
Chevrolet Spark 2013-2015
99-3309B-LC
Dash Disassembly ..................................................2
Kit Preparation ....................................................... 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– ISO DDIN radio provision ...................................... 3
Axxess Interface Installation ................................ 4
– Connections to be made ....................................... 4
– Installing the Axxess interface .............................. 5
– Initializing the Axxess interface ............................ 5
– Vehicle customization with the optional AX-LCD ... 5
Table of Contents
A
B C D E

Metra Electronics 99-3309B-LC Specifications

General

Manufacturer	Metra Electronics
Model	99-3309B-LC
Category	Car Stereo System
Color	Black
Material	Plastic
ISO DDIN radio provision	Yes
Painted matte black	Yes
Type	Dash Kit
Function	Allows installation of an aftermarket radio
Wiring Harness	Included
Antenna Adapter	Included

Summary

Tools Required

Installation Tools List

Lists the necessary tools for performing the installation procedures.

Dash Disassembly

Remove Factory Radio Trim and Radio

Procedure to unclip the trim panel and remove screws securing the factory radio.

Kit Preparation

Prepare Factory Trim Panel Components

Steps to remove A/C vents and hazard button from the original trim panel.

Prepare New Trim Panel

Attaching A/C vents and panel clips to the Metra 99-3309B-LC trim panel.

Kit Assembly

ISO DIN Radio Provision with Pocket

Assembling the pocket and radio brackets for the ISO DIN installation.

ISO DDIN Radio Provision

Mounting the radio into brackets for the ISO DDIN installation.

Axxess Interface Installation

Axxess Interface Features

Overview of the capabilities and benefits of the Axxess interface.

Required Interface Components and Tools

Identifies the interface parts and tools needed for installation.

Connecting Axxess Harness to Radio

Step-by-step guide for wiring the Axxess interface harness to the aftermarket radio.

Installing the Axxess Interface

Initial Connection and Wiring

Connecting the interface harness to the vehicle and interface module.

Initializing the Axxess Interface

Interface Initialization Procedure

Steps to follow if the Axxess interface loses power for proper re-initialization.

Vehicle Customization with Optional AX-LCD

AX-LCD Harness Connections

Wiring the AX-LCD harness to the 3309B-LC harness for vehicle personalization.

AX-LCD Menu Navigation

Procedure for navigating the AX-LCD screen to select interface and gateway.

Important Installation Notes

Technical Support Contact

Contact information and recommendations for seeking technical assistance.