EasyManua.ls Logo

Metra Electronics 99-7603 User Manual

Metra Electronics 99-7603
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
APPLICATIONS
METRA. The World’s best kits.
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 5/16/2014 INST99-7603
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 99-7603
A) Radio housing • B) ISO brackets • C) Single DIN trim plate • D) Double DIN trim plate
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-7552 - Nissan wiring harness power/
4 speaker 2007-up
• 70-7553 - Nissan amplifier integration
harness 2007-up
Antenna Adapter:
• 40-NI12 - Aftermarket radio to Nissan 2007-up
• Small flat blade screwdriver • Panel removal tool
• Phillips screwdriver
TOOLS REQUIRED
A
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
KIT FEATURES
Nissan Versa 2007-2011
99-7603
B
C
D
Question and Answer IconNeed help?

Do you have a question about the Metra Electronics 99-7603 and is the answer not in the manual?

Metra Electronics 99-7603 Specifications

General IconGeneral
ManufacturerMetra Electronics
Model99-7603
CategoryCar Stereo System
MaterialPlastic
ColorBlack
Installation TypeDash Kit
ISO DDIN radio provisionYes
ISO DIN radio provisionYes
Wiring HarnessNot included
Antenna AdapterNot included
FunctionRadio Installation Kit

Summary

Dash Disassembly

Remove Upper Dash Panel

Unclip and remove the panel located above the radio unit.

Remove Factory Radio and Brackets

Remove Phillips screws securing the factory radio and its brackets. Retain brackets.

Kit Assembly

DIN Radio Provision with Pocket

Install DIN cage into housing, secure aftermarket radio, and attach trim plate.

ISO Radio Provision with Pocket

Modify and mount ISO brackets to aftermarket radio, then install into housing.

Double DIN Radio Provision

Mount factory brackets to double DIN radio, place trim plate, and connect wiring.

Related product manuals