Need help?Do you have a question about the METREL BetaPATPlus MI 3304 and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Type | Portable Appliance Tester |
| Model | BetaPATPlus MI 3304 |
| Manufacturer | METREL |
| Leakage Current Test | Yes |
| DC test voltage | 250 V, 500 V |
| Continuity test current | 200 mA |
| Display | LCD |
| Operating Temperature | 0 °C - 40 °C |
| Measurement Types | Insulation resistance, Continuity, Leakage current, Earth bond, Substitute leakage current, Touch leakage current, Load / leakage current, TRMS voltage, TRMS current |
General safety warnings for operating the instrument safely and preventing damage.
Detailed layout of the instrument's front panel controls, connectors, and display.
Explains various symbols and error messages shown on the instrument display.
Tool for simplifying and speeding up repeated testing.
Step-by-step guide to conducting individual tests.
Explains earth bond resistance tests for Class I appliances.
Details insulation resistance testing for Class I and II appliances.
Explains substitute leakage current tests for Class I and II appliances.
Describes leakage current and power measurement.
Explains touch leakage current testing based on human body model.
Ensures proper operation of residual current devices.
High voltage test for insulation material withstand.
Selecting pre-programmed autotest sequences.
Re-using stored data for efficient periodic testing.
Importance and recommendation for regular calibration.
To Next Page