EasyManuals Logo

Metro DataVac ES ACTIVE Series User Manual

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
Please make sure that there are no obvious transport
damages. Should you notice any damages on the
connection panel or on the casing, do not take the
speaker system into operation and immediately consult
your local dealer.
Protection Class
This device falls under protection class I. The power
plug must only be plugged into a protection class I
outlet. The voltage and frequency must exactly be the
same as stated on the device. Wrong voltages or power
outlets can lead to the destruction of the device and to
mortal electrical shock.
Power Cord
Always plug in the power plug least. The power plug
must always be inserted without force. Make sure that
the plug is tightly connected with the outlet. Never let
the power cord come into contact with other cables!
Handle the power cord and all connections with the
mains with particular caution! Never touch them with
wet hands, as this could lead to mortal electrical shock.
Never modify, bend, strain mechanically, put pressure
on, pull or heat up the power cord. Never operate next
to sources of heat or cold. Disregard can lead to power
cord damages, fire or mortal electrical shock. The cable
insert or the female part in the device must never be
strained. There must always be sufficient cable to the
device. Otherwise, the cable may be damaged which
may lead to mortal damage. Make sure that the power
cord is never crimped or damaged by sharp edges.
Check the device and the power cord from time to time.
If extension cords are used, make sure that the core
diameter is sufficient for the required power
consumption of the device. All warnings concerning the
power cords are also valid for possible extension cords.
Always disconnect from the mains, when the device is
not in use or before cleaning it. Only handle the power
cord by the plug. Never pull out the plug by tugging the
power cord. Otherwise, the cable or plug can be
damaged leading to mortal electrical shock. If the power
plug or the power switch is not accessible, the device
must be disconnected via the mains.
If the power plug or the device is dusty, the device must
be taken out of operation, disconnected and then be
cleaned with a dry cloth. Dust can reduce the insulation
which may lead to mortal electrical shock. More severe
dirt in and at the device should only be removed by a
specialist.
Liquids
There must never enter any liquid into power outlets,
extension cords or any holes in the housing of the
device. If you suppose that also a minimal amount of
liquid may have entered the device, it must immediately
be disconnected. This is also valid, if the device was
exposed to high humidity. Also if the device is still
running, the device must be checked by a specialist if
the liquid has reduced any insulation. Reduced
insulation can cause mortal electrical shock.
Foreign Objects
There must never be any objects entering into the
device. This is especially valid for metal parts. If any
metal parts like staples or coarse metal chips enter into
the device, the device must be taken out of operation
and disconnected immediately. Malfunction or short-
circuits caused by metal parts may cause mortal
injuries.
Secure Setup
Please note that speaker systems could move due to
bass beats and vibrations. Furthermore, unintended
pushes from DJs, musicians or the audience present
further risk. This is why the speaker system must
always be secured against moving or the respective
area has to be blocked.
Prior to Switching on
Before the speaker system is switched on all faders and
volume controls have to be set to zero or minimum
position.
Children and Amateurs
Keep away children and amateurs!
Maintenance and Service
There are no serviceable parts inside the speaker
system. Maintenance and service operations are only to
be carried out by authorized dealers!
WARNING!
Speaker systems must only be operated by trained persons. Danger of Life due to crashing
speaker systems or hearing loss due to excessive sound pressure levels! The different local
conditions have to be considered in terms of safety rules.
www.metroaudiosystems.de
18
Unpacking
Please make sure that there are no obvious transport
damages. Should you notice any damages on the con-
nection panel or on the casing, do not take the speaker
system into operation and immediately consult your local
dealer.
Protection Class
This device falls under protection class I. The power plug
must only be plugged into a protection class I outlet.
The voltage and frequency must exactly be the same as
stated on the device. Wrong voltages or power outlets
can lead to the destruction of the device and to mortal
electrical shock.
Power Cord
Always plug in the power plug least. The power plug
must always be inserted without force. Make sure that
the plug is tightly connected with the outlet. Never let the
power cord come into contact with other cables! Handle
the power cord and all connections with the mains with
particular caution! Never touch them with wet hands, as
this could lead to mortal electrical shock. Never modify,
bend, strain mechanically, put pressure on, pull or heat
up the power cord. Never operate next to sources of
heat or cold. Disregard can lead to power cord damages,
re or mortal electrical shock. The cable insert or the
female part in the device must never be strained. There
must always be sufcient cable to the device. Otherwise,
the cable may be damaged which may lead to mortal
damage. Make sure that the power cord is never crimped
or damaged by sharp edges. Check the device and the
power cord from time to time. If extension cords are used,
make sure that the core diameter is sufcient for the
required power consumption of the device. All warnings
concerning the power cords are also valid for possible
extension cords. Always disconnect from the mains,
when the device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull out the
plug by tugging the power cord. Otherwise, the cable or
plug can be damaged leading to mortal electrical shock. If
the power plug or the power switch is not accessible, the
device must be disconnected via the mains.
If the power plug or the device is dusty, the device must
be taken out of operation, disconnected and then be
cleaned with a dry cloth. Dust can reduce the insulation
which may lead to mortal electrical shock. More severe
dirt in and at the device should only be removed by a
specialist.
Liquids
There must never enter any liquid into power outlets,
extension cords or any holes in the housing of the device.
If you suppose that also a minimal amount of liquid may
have entered the device, it must immediately be discon-
nected. This is also valid, if the device was exposed to
high humidity. Also if the device is still running, the device
must be checked by a specialist if the liquid has reduced
any insulation. Reduced insulation can cause mortal elec-
trical shock.
Foreign Objects
There must never be any objects entering into the device.
This is especially valid for metal parts. If any metal parts
like staples or coarse metal chips enter into the device,
the device must be taken out of operation and discon-
nected immediately. Malfunction or shortcircuits caused
by metal parts may cause mortal injuries.
Secure Setup
Please note that speaker systems could move due to
bass beats and vibrations. Furthermore, unintended
pushes from DJs, musicians or the audience present
further risk. This is why the speaker system must always
be secured against moving or the respective area has to
be blocked.
Prior to Switching on
Before the speaker system is switched on all faders
and volume controls have to be set to zero or minimum
position.
Children and Amateurs
Keep away children and amateurs!
Maintenance and Service
There are no serviceable parts inside the speaker sys-
tem. Maintenance and service operations are only to be
carried out by authorized dealers!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Metro DataVac ES ACTIVE Series and is the answer not in the manual?

Metro DataVac ES ACTIVE Series Specifications

General IconGeneral
BrandMetro DataVac
ModelES ACTIVE Series
CategorySpeaker System
LanguageEnglish