GB
- 17 -
Problem Possible cause Solution
Appliance does
not seal vacuum
pouch properly.
Sealing time not
long enough.
Increase sealing time
and try again.
Moisture or food
particles are present
in the seal area.
Wipe the inside of the
pouch clean and try
again.
Pouch is not
properly placed
along seal bar (3).
Reposition the bag.
Make sure the open
end of the pouch is
across the seal bar
(3) and there are no
wrinkles in the pouch
along the seal bar (3).
If sealing is incorrect,
cut off the seal and
make a new one.
7. Disposal
Environmental Protection
Discarded electric appliances are
recyclable and should not be discarded
in the domestic waste! Please actively
support us in conserving resources and
protecting the environment by returning
this appliance to the collection centres.
Dispose of packaging in accordance to
applicable legal regulations.
Declaration of conformity
Hereby, we declare that this Chamber
Vacuum Sealer is in compliance with the
essential requirements and other relevant
provisions of Directive 2006/42/EC.
8. Warranty
A statutory warranty applies for this product.
Damages caused by wrong treatment or operation,
by false placement or storage, improper connection
or installation, as well as force or other external
influences are not covered by this warranty. We
recommend careful reading of the operating
instructions as it contains important information.
Note:
1. In case this product does not function correctly,
please firstly check if there are other reasons, e.g.
for electrical appliances interruption of the power
supply, or generally incorrect handling are the
cause.
2. Please note that, where possible, the following
documents or rather information should be
provided together with your faulty product:
− Purchase receipt
− Model description/Type/Brand
− Describe the fault and problem as detailed as
possible
In the case of a claim for guarantee or defects,
please contact the seller.
GWL 8/14 EN
GVS1000 ENGLISH 190102
To Next Page
Loading...
Need help?
General