Metro Mobility M1 Plus - Storage and Faults; Scooter Storage Guidelines; Handling Electronic Issues

44
Clean and protect with petroleum jelly.
Ensure parking brake (where fitted) is correctly
adjusted
●
Check stabilizer wheels for wear
●
Inspect motor brushes
●
Full service by dealer
●
Fig.A Fig.B Fig.C
Storage
When storing your scooter for long periods (in excess of one week), charge
batteries for 12 hours and then disconnect the batteries to minimize battery
discharge.
Electronic faults
Do not attempt to investigate faults in the control box, the control pod or
charger as the design and set up of the electronics is of a safety critical
nature.
Spare parts and service are available from authorized dealers.
Replacing LED (where fitted)
Caution! Disconnect batteries before changing LED.
Wheels
Note: Wheels should only be removed and refitted by an authorized dealer.