Need help?Do you have a question about the Metrohm 873 Biodiesel Rancimat and is the answer not in the manual?
General| Model | 873 Biodiesel Rancimat |
|---|---|
| Applications | Determination of the oxidation stability of biodiesel |
| Compliance | EN 14112, EN 15751 |
| Air Flow Rate | 10 L/h |
| Measurement Range (Time) | 0 to 100 h |
| Data Output | USB, Ethernet |
| Power Supply | 100-240 V AC |
| Weight | Approximately 15 kg |
| Measuring Range | 0 to 100 h (induction period) |
| Measurement Principle | Accelerated oxidation by heat and air flow, determination of the induction time by conductivity measurement |
PC-controlled device for determining oxidation stability of biodiesel and blends.
Automated variant of AOM for determining induction time of fats and oils.
Information and warnings for safe instrument operation.
Essential instructions for safe operation, handling, and potential hazards.
Guidance on unpacking, checking, and locating the instrument for installation.
Instructions for attaching various accessories for air supply and vessels.
Procedures for connecting the instrument to the power supply safely.
Steps for establishing communication between the instrument and a PC.
Basic principles for operating the 873 Biodiesel Rancimat software and instrument.
Configuration options for instrument communication, access rights, and parameters.
Details on instrument information, status overview, and event log.
Procedures for determining cell constants and Delta T for accurate measurements.
Creating, managing, and describing methods for sample analysis.
Step-by-step guide for preparing, starting, and conducting determinations.
Displaying, analyzing, exporting, and printing determination results.
Information and procedures for Good Laboratory Practice tests and monitoring.
Guidelines for instrument care, spillages, and protecting connections.
Procedure for replacing the dust filter to ensure air quality.
Instructions for regenerating or replacing the molecular sieve.
Details on the internal hardware self-test executed upon instrument startup.
Information on Metrohm's support for quality management and instrument validation.
Common issues, their causes, and recommended remedies for instrument problems.
Key instrument parameters like connectivity, sample capacity, and sample amount.
Specifications for temperature control, measurement, resolution, and deviation.
Details on the conductivity sensor, measuring principle, and measurement range.
Specifications for the pump, adjustable range, and deviation for gas flow.
Technical details of the GLP test set, including sensor and resistor specifications.
Specifications for the RS-232 interface, including plug type and basic settings.
Technical details for mains connection, including voltage, frequency, power, and fuse.
Instrument design, testing standards, and safety instructions.
Fulfilled standards for emission and immunity related to EMC.
Operating, storage, and transport temperature ranges.
Specifications for the instrument's housing material, dimensions, and weight.
Certification of the instrument's compliance with electrical and safety standards.
Metrohm's adherence to ISO 9001:2000 standards for development and production.
Information on the warranty period, terms, and conditions for the instrument.
List of items included with the 873 Biodiesel Rancimat instrument.
List of optional accessories available for purchase for the instrument.
To Next Page