METRON ACCUSONIC PLUS User Manual

Metron Medical Australia Pty Ltd
A.C.N.050 240 527
P.O. Box 2164,
57 Aster Avenue
Carrum Downs Victoria Australia 3201
Tel: (03) 9775 1234 Fax: (03) 9775 1990
Int: 61 3 9775 1234 Int: 61 3 9775 1990
TECHNICAL MANUAL
METRON ACCUSONIC PLUS
ULTRASOUND THERAPY UNIT
MODEL AP 100
Prepared by
Metron Medical Australia P/L
Version 1.6 March 2002

METRON ACCUSONIC PLUS Specifications

General

Brand	METRON
Model	ACCUSONIC PLUS
Category	Medical Equipment
Language	English

Summary

EC Declaration of Conformity

Specifications

Introduction

Schematic Diagram Descriptions

Printed Circuit Board Overview

Details the main circuit board's power supply, oscillator, microcontroller, and contact sense control.

Displays and Drivers

Explains the driving mechanism for seven segment displays and LEDs using microprocessor-controlled chips.

Ultrasonic Treatment Applicator

Describes the applicator assembly, transducer, EEPROM for calibration data, and associated safety symbol.

Preventative Maintenance and Quality Assurance

Calibration and Adjustment Procedure

Outlines the required equipment and the step-by-step procedure for calibrating the ultrasound applicators.

Electrical Safety Inspection

Recommends regular electrical safety checks and lists relevant Australian standards for electromedical equipment.

Unit Disassembly and Assembly

Provides careful instructions for safely taking apart and reassembling the equipment unit.

Schematic Diagrams

Main Circuit Board Layout

Illustrates the physical placement of components on the main printed circuit board.

Main Printed Circuit Board Schematic

Presents the detailed schematic diagram for the main printed circuit board of the unit.

Treatment Head Circuit Board Schematic

Shows the schematic diagram for the printed circuit board located in the treatment head assembly.