Metronome LE PLAYER 3+ - 4 Using LE PLAYER 3; Connecting LE PLAYER 3; Starting LE PLAYER 3

4
4 Using LE PLAYER
®
3+
4.1 Connecting LE PLAYER
®
3+
Take a look at the back of the LE PLAYER
®
3+ :
1 : Power switch 2 : Power cable connector
3 : Digital Inputs 4 : Analog Outputs
Métronome
®
do not advise specific connexion cables. The cables may influence the sound restitution and should
be tested before use.
4.2. Starting LE PLAYER
®
3+
After having carefully plugged all necessary connexions, start your LE PLAYER
®
3+ using the main switch [1]. All the
digital outputs are always active, so there is no available settings to activate or deactivate one or another output.
LE PLAYER
®
3+ can be switched on during a long period, either on normal mode or on stand-by. However for a
prolonged absence it is advised to turn it off using the main power switch [1].
1
2
3
4