All-Engineering BV
https://metrumacoustics.com
info@metrumacoustics.com
Technical specs :
Working principle: Non-oversampling 24 bit DAC.
Power supply: 30 VA single toroid transformer. Average power
consumption 8 Watts. On standby < 1 Watt
Power requirement: 110/115V AC or 220/230 V AC 60/50Hz
Inputs: 1x optical Toslink, 2x RCA coaxial. 1x USB module optional
Outputs: 2x RCA connectors. One headphone connector
Output voltage: RCA: 2 Volts RMS. Headpone:2 Volts RMS
Frequency response: 1Hz -0.8dB, 20 kHz -1.5 dB 44.1kHz sampling.
1Hz -0.8dB, 65 kHz -3dB 192kHz sampling.
Distortion: 0,007 % THD
Noise floor: -145 dB related to 2 Volt RMS
Output impedance: 100 Ohms RCA. 3 Ohms for headphone connection.
Sampling frequency: Optical: 44 - 96 kHz sampling ,16 or 24 bits.
Coaxial: 44 - 192 kHz sampling, 16 or 24 bits.
USB: 44 -384 kHz sampling.
Dimensions WxHxD: 190 x 60 x 245 mm.
Weight: 2.5 kg.
Subject to change without notice.
All Engineering
Ambachtsweg 4K
3953BZ Maarsbergen
The Netherlands
To Previous Page
Loading...