The chain must be strong enough to hold the weight of
the loaded spreader. If using a grab hook at the end(s)
of the chain to secure the chain to itself, a hook latch
must be installed.
The length of the safety chain is not to be any longer
than necessary to turn without interference. If any
chain links or attachment hardware are broken or
stretched, repair before using. Store chain so it does
not corrode or become damaged. Do not use this
chain for other implements because the strength and
length of chain may not be adequate. Identify this
chain for use on this particular spreader.
Safety chain designed for this spreader can be or-
dered on page 22.
Page 12
FIGURE 3. SUGGESTED SAFETY CHAIN INSTALLATION
GRAB HOOK W/LATCH
INTERMEDIATE SUPPORT
To Next Page
Loading...
