Operating Instructions
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, CA 94702
DS-2
Mid-Bass
Loudspeaker
The DS-2 is a high-power, arrayable mid-bass loud-
speaker designed to supplement Meyer Sound rein–
forcement systems in the 50-160 Hz range. The sys-
tem utilizes two proprietary 15-inch cone drivers in a
folded horn enclosure braced with steel vertical rein-
forcing rods. The horn features a hyperbolic flare for
maximum energy transfer with minimum frequency
response ripple. Its balanced compression chamber
presents a symmetrical load to the drivers, providing
very high power handling and low distortion.
The DS-2 is designed to operate as a system with the
D-2 Control Electronics Unit. The D-2 comprises an
electronic crossover, Meyer Sound exclusive
SpeakerSense™ driver protection circuitry, and am-
plitude and phase response correction circuitry opti-
mized for the DS-2. A switch-defeatable crossover
and line-level output to drive subwoofer systems is
provided, with a preset-panel sub polarity switch to
facilitate aligning the subwoofers with the main sys-
tem.
To Next Page
Need help?
General
