Need help?Do you have a question about the Meyer Sound UPJunior and is the answer not in the manual?
General| Frequency Response | 60 Hz - 18 kHz |
|---|---|
| Coverage | 100° x 100° |
| Power Handling | N/A (Powered) |
| LF Driver | 10" woofer |
| HF Driver | 1" compression driver |
| Weight | 44 lbs (20.0 kg) |
| Amplifier Type | Class D |
| Input Type | Balanced |
| Input Impedance | 20 kΩ |
| Enclosure Material | Plywood |
| Input Connectors | XLR |
Adapter plate for vertical/horizontal arrays of two or three UPJunior cabinets, enabling flexible mounting and rigging.
Cradle-style mounting yoke that suspends a single UPJunior loudspeaker with wide horizontal and vertical adjustment.
Details frequency range, response, phase, SPL, dynamic range, coverage, and crossover frequency.
Information on low and high frequency drivers, impedance, and power handling capabilities.
Covers input type, common mode range, connectors, impedance, wiring, DC blocking, CMRR, RF, TIM filters, and sensitivity.
Details amplifier type, output power, THD, IM, load capacity, and cooling.
Information on AC power connector, voltage selection, safety rated voltage, and turn on/off points.
Details enclosure, finish, protective grille, rigging options, dimensions, and weight.
To Next Page