EasyManua.ls Logo

Meyer Sound UPJunior - AC Power Specifications; Physical Specifications

Meyer Sound UPJunior
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ultracompact VariO loudspeaker
10 No automatic turn-off voltages. Voltages
above 265 V AC are fuse protected but
may cause permanent damage to the
power supply. Voltages below 90 V AC
may result in intermittent operation.
11 Current draw for a single loudspeaker.
Loop out not used.
ACPOWER
ACpowerconnector PowerCon with looping output
Voltageselection Automatic
Safetyagencyratedoperatingvoltage 100 V AC – 240 V AC, 50/60 Hz
Turnon/turnoffpoints
10
90 V AC – 264 V AC, 50/60 Hz
CURRENTDRAW
11
Idlecurrent 0.448 A rms (115 V AC), 0.285 A rms (230 V AC), 0.497 A rms (100 V AC)
Max.long-termcontinuouscurrent(>10sec) 2.55 A rms (115 V AC), 1.55 A rms (230 V AC), 2.75 A rms (100 V AC)
Burstcurrent(<1sec) 2.9 A rms (115 V AC), 1.7 A rms (230 V AC), 3.2 A rms (100 V AC)
Ultimateshort-termpeakcurrentdraw 12.0 A peak (115 V AC), 9.0 A peak (230 V AC), 13.0 A peak (100 V AC)
Inrushcurrent 15.0 A peak (115 V AC), 13.0 A peak (230 V AC), 15.0 A peak (100 V AC)
PHYSICAL
Enclosure Premium birch plywood
Finish Black textured
Protectivegrille Powder-coated hex-stamped steel
Rigging QuickFly rigging options
Dimensions 9.00 w x 19.04 h x 10.20 d (228.60 mm x 483.55 mm x 259.08 mm)
Weight 28 lbs (12.70 kg)

Related product manuals