Need help?Do you have a question about the Meyer Sound Galileo GALAXY 816 and is the answer not in the manual?
General| Processing Power/Sampling Rate | 96 kHz |
|---|---|
| Audio Outputs | 16 analog |
| Network Protocol | AVB |
| Frequency Response | 20 Hz – 20 kHz |
| Dynamic Range | >110 dB |
| THD+N | <0.01% |
| Power Supply | 100-240 VAC |
Explains safety symbols used in the manual, including warnings for voltage, fuses, and hot surfaces.
Overview of the processor's capabilities, features, and network interoperability.
Description of connectors and ports on the rear panel of the processors.
Introduction to the Compass software interface for processor control and navigation.
Navigating the Compass interface, finding devices, and managing processor inventory.
Instructions for updating the GALAXY processor firmware via the network.
Accessing detailed controls for each connected processor.
Accessing various settings like Network, Input/Output, SIM, Environment, and Access.
Configuring input/output types, clocking modes, and voltage ranges.
Detailed configuration for input signal equalization and processing parameters.
Adjusting gain, delay, mute, and bypass for individual input channels.
Configuring the 5-band parametric equalizer for input channels.
Detailed configuration for output signal equalization and processing parameters.
Routing inputs to outputs and adjusting gain at cross-points in the matrix.
Assigning delay times to matrix cross-points for signal alignment.
Adjusting signal levels for all inputs via fader controls.
Adjusting signal levels for all outputs via fader controls.
Shaping line array low-mid frequency coverage using filters and parameters.
To Next Page
