Meyer Sound LEOPARD User Manual

LEOPARD OPERATING INSTRUCTIONS
17
power cable must be rated for the total current draw of all
loudspeakers looped from the power source.
• Do not operate the loudspeaker if the power cable is
frayed or broken.
• Keep all liquids away from LEOPARD loudspeakers to
avoid hazards from electrical shock.

Meyer Sound LEOPARD Specifications

General

Amplifier Type	Class D
High Frequency Driver	1 x 3-inch compression driver
Input Connector	XLR 3-pin (audio only)
Connectors	Neutrik NL4
Low Frequency Driver	2 x 9" cone drivers with 2" voice coil