Need help?Do you have a question about the Meyer Sound MILO 120 and is the answer not in the manual?
General| Coverage | 120° horizontal |
|---|---|
| Type | High-Power Curvilinear Array Loudspeaker |
| Input | XLR 3-pin |
| Coverage Pattern | 120° Horizontal |
| Dimensions | 508 mm |
| Connectors | XLR 3-pin |
| Amplifier | 3-channel Class AB/H |
Describes the MILO 120's self-powered, 4-channel amplifier, TruPower limiting, and RMS interface.
Details proper AC power distribution and grounding for audio equipment to prevent noise and damage.
Specifies the safe operating voltage windows and limits for the MILO 120 loudspeaker.
Explains current ratings, circuit breaker selection, and cable gauge for operating voltages.
Illustrates correct wiring for power cables and distribution systems using various connectors.
Highlights critical electrical safety issues, including adapter use and grounding requirements.
Explains the HP-4/MILO 120 amplifier, driver protection, and proper driver replacement procedures.
Explains the TruPower limiting system, its advantages over conventional limiters, and driver protection.
Explains the RMS user panel, including LEDs and buttons for monitoring and control.
Details integrating MILO 120 as downfill in MILO arrays, considering element count and splay angles.
Introduces MAPP Online, a tool for predicting coverage, response, and SPL of loudspeaker systems.
Describes the SIM audio analyzer for acoustical system measurement, analysis, and alignment.
Guides on replacing the HP-4/MILO 120 amplifier, including connector and screw procedures.
Provides detailed specifications for audio input type, impedance, connectors, and wiring.
Details AC power connector, voltage selection, operating voltage, and current draw specifications.
To Next Page
