Need help?Do you have a question about the Meyer Sound MJF-212A and is the answer not in the manual?
Essential safety guidelines for operating the loudspeaker, covering water, heat, and electrical safety.
Details the high-power drivers, enclosure, horn design, and coverage of the MJF-212A monitor.
Covers the self-powered design, 3-channel amplifier, control circuitry, and Intelligent AC™ power supply.
Guidelines for proper AC power distribution, polarity, and earth ground connection in audio systems.
Explains automatic voltage selection, operating voltage windows, and protective functions.
Defines current types (idle, long-term, burst, peak) and their relation to circuit breakers and cables.
Critical safety warnings on connector limits, grounding, ground-lifting adapters, and circuit breaker trips.
Essential safety guidelines for operating the loudspeaker, covering water, heat, and electrical safety.
Details the high-power drivers, enclosure, horn design, and coverage of the MJF-212A monitor.
Covers the self-powered design, 3-channel amplifier, control circuitry, and Intelligent AC™ power supply.
Guidelines for proper AC power distribution, polarity, and earth ground connection in audio systems.
Explains automatic voltage selection, operating voltage windows, and protective functions.
Defines current types (idle, long-term, burst, peak) and their relation to circuit breakers and cables.
Critical safety warnings on connector limits, grounding, ground-lifting adapters, and circuit breaker trips.
General| Type | Stage Monitor |
|---|---|
| Maximum Peak SPL | 136 dB |
| Power Rating | 800 W |
| Power Handling | 800 W |
| Finish | Black textured |
| Frequency Response | 60 Hz - 18 kHz |
| Low Frequency Transducer | 2 x 12" |
| Weight | 114 lbs |
| Coverage Pattern | 90° x 60° |
| Amplifier Type | Class D |
| AC Power | 100-240 V AC |
| Nominal Impedance | 8 Ω |
| Enclosure Material | Plywood |
| Grille | Powder-coated steel |
| Connectors | Neutrik NL4 |
To Next Page
