EasyManua.ls Logo

Meyer Lot Pro - Pre-Delivery Inspection

Meyer Lot Pro
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vehicle Make: Vehicle Model:
Vehicle Year: Vehicle VIN#:
Vehicle FGAWR: Installing Company:
Mounting Type: Plow Type:
EZ Plus 7.5 8.0 8.5 9.0
Hydraulic Serial Number: Moldboard Serial Number:
Comments:
Inspected By: W.O.# Date:
Customer Signature:
PRE-DELIVERY INSPECTION
All bolts torqued to speci cation
Suspension interference
Clevis height in inches
Diode Installed
Trip springs adjusted
Lift Chain Adjusted
Check for hydraulic  uid leaks
Hydraulic  uid Level
Dielectric grease applied to ALL electrical connection
All wires/modules secured
Plow Stops Adjusted (plow cannot bump hyd. unit)
Controller Operation
Controller Turns Off when vehicle shut off
Plow Operation Up
Plow Operation Left
Plow Operation Right
Plow Operation Down
Plow Drop Speed Adjusted
Plow Light Blinker Left & Right Operation
Plow Light Low & High Beam Operation
Plow Lights Adjusted
Plow Mount/Dismount reviewed with Customer
Plow Operation reviewed with Customer
HFP (Hands Free Plowing) reviewed with Customer
Warranty/Registration/Owners Manual
reviewed with Customer
(10)
11-1/4"
Clevis height
Serial Number Decal Locations
E-72 unit serial number is
under the cover attached to the
hydraulic unit.
Moldboard serial number is attached to the
back of the moldboard.
Please see your owner’s manual for Pre-Season, Post-Season and general maintenance.

Related product manuals