MF FA Series - Maintenance; Cleaning Precautions

10
(4)The output sequence of the balance-frame data is as follows:
1
2
3
4
5
6
7
8
MODEL
SPACES
SPACES
OR *
SYMBOLS
+ OR -
DATA
DATA
DATA
DATA OR
DECIMAL
POINT
9
10
11
12
13
14
15
16
DATA OR
DECIMAL
POINT
DATA
DATA
DATA
UNIT 1
UNIT 2
ENTER
LINE
FEED
Ⅶ.Maintenance
The FA series electronic balance is a precision mechatronics intelligent measuring
instrument, so it must be treated as seriously and carefully maintained as other precision
instruments.
1.Do not use sharp objects (such as pencils, ballpoint pens) to press keys, but only use
fingers to press keys.
2.Be careful not to let objects fall from a height on the weighing pan, so as not to damage the
weighing mechanism.
3.Do not expose the balance to high humidity or dusty environment for a long time.
4.After the balance is used up, it is best to cover it with a cover to prevent dust from
intruding.
5.Keep the balance clean and dry.
6.Matters needing attention when cleaning:
(1)Before cleaning, unplug the power supply;
(2) Do not use corrosive cleaning agents (such as solvents). Use a lint-free soft
cloth soaked in water and then some neutral detergent for cleaning.
(3)When cleaning, be careful not to let water drop into the balance;
(4)After cleaning, wipe the balance carefully with a soft, dry, lint-free cloth.