MF FA Series - Troubleshooting; Unpacking and Inspection

11
Ⅷ.Troubleshooting
Malfunction
Reason
Approach
NO display
No power supply;
Power transformer is broken;
Plug in adapter;
Change the fuse power transformer;
If it is broken again, please send it to
the maintenance department to repair;
Unstable
display
Bad working condition;
The windshield is open;
Something between the scale pan
and working table.
The power exceeds its permissible
value and is unstable;
Unstable goods
(moisture evaporation)
Improve the working condition, avoid
vibration and airflow;
Close the windshield;
Take out eyewinker;
rotate the weighing pan to prevent it
from scratching;
Connect 110V AC power supply;
Difference
between
displayed
value and
actual value
The scale hasn’t been calibrated;
Not turn to zero;
Not horizontal;
Calibration;
Tare;
Adjust level;
Ⅸ.Unpacking and inspection
Please unpack the instrument carefully and check the parts against the packing list in the
appendix of this manual.Please contact our company for any damage that is found in time.
Ⅹ.Packing list
NO.
NAME
QTY
1
Main scale
1
2
Scale pan
1
3
Adapter
1
4
Operation instruction
1
5
Wiping cloth
1
6
Glove
1