Ⅺ.Appendix
Appendix 1
The scale connecting to the computer:
1.Click ‘Start’
Procedure
Appendix
Communication
Super terminal
2.Input the name;Select the icon,then click confirmation.
3.Ignore the first two steps,choose ‘‘N’: com 1’, click confirmation.
4.Select:(1)Baud rate:1200(or 2400 according to the manual)
(2) Data bit:8
(3) Parity Check:NO
(4) Stop bit:1
(5) Control of the data flow:Hardware
Click confirmation and it will show the measuring value on the computer.
*Tips: Please keep the instrument packaging properly, the original packaging is required
when returning for repair.
To Next Page
Loading...