MFB SYNTH Pro - General Information and Startup; Product Overview; Getting Started

MENU VCF Extra
VCF1 Reso 00-31
VCF2 Reso 00-31
VCF2 Qcomp 00-31
Reso calibrates the strength of the resonance.
With Qcomp you can adjust the bass loss with increasing resonance for VCF2.
MENU VCA Setting
Envelope Env1, Env2, Env3
Modulation LFO1, Inv1, LFO2, Inv2, ModW, AftT
Velocity On / Off
Envelope selects the envelope for the VCA.
Modulation determines what modulates the VCA.
With Velocity you can choose whether the VCA should be velocity-sensitive or not.
MENU LFO Setting
LFO1 Sync Gate, 1/96 - 4/4
LFO2 Sync Gate, 1/96 - 4/4
LFO2> LFO1 00-31 (LFO2 modulates LFO1)
With Sync you can set how the LFO is synced.
With LFO2> LFO1 you can set to what extent LFO1 is modulated by LFO2.
MENU Additional
Glide Lin / Log
Sustain3 00-31
Effect Extra Reverb, Delay, Chorus
With Glide you can choose if this should be linear or logarhythmic.
With Sustain3 you can activate the sustain for ADS (R) 3.
With Effect Extra you can select the effect that is selected with Type in 4th place.
MENU MIDI
Channel: 01-16
Clock Int / Ext
CCHG Off / Send / Receive
Channel sets the MIDI channel.
Clock can be used to select whether the internal clock is active.
With Cchg one can determine whether Control Change should be sent or received.