MFJ-856 Instruction Manual Directional AC Line Noise Meter
2
Note
: Since the TRANSMITTER and ANTENNA controls interact, they must
be adjusted alternately until minimum SWR is obtained.
7. To bypass the MFJ-906, place the TUNER switch on the front panel out to
the BYPASS position.
MFJ-906 Front Panel
MFJ-906 Rear Panel
TECHNICAL ASSISTANCE
If you have any problem with this unit first check the appropriate section of this
manual. If the manual does not reference your problem or your problem is not
solved by reading the manual you may call MFJ Technical Service at 662-323-
0549 or the MFJ Factory at 662-323-5869. You will be best helped if you have
your unit, manual and all information on your station handy so you can answer
any questions the technicians may ask.
You can also send questions by mail to MFJ Enterprises, Inc., 300 Industrial
Park Road, Starkville, MS 39759; by Facsimile to 662-323-6551; or by email to
techinfo@mfjenterprises.com. Send a complete description of your problem, an
explanation of exactly how you are using your unit, and a complete description
of your station.
To Next Page
Loading...
