MFZ Ovitor CS 110 - Information in this document; Meaning of symbols

2 – CS 110 Door Controls / Rev. A 05
1. Contents
1. Contents 2
2. Information in this document 2
3. General safety instructions 3
4. Product overview 4
5. Initial operation 6
6. Initialisation 11
7. Changing the direction of rotation 11
8. Setting the travel limits 11
9. Programming using the LCD Monitor 13
10. Navigator (only with the LCD monitor) 14
11. Input mode (LCD monitor) 15
12. Error indication and elimination 16
13. Door cycle counter 17
14. Technical data 17
15. EC Declaration of Incorporation 18
Original Operating Instructions
− Protected by copyright.
− No part of this manual may be reproduced without our
prior approval.
− Subject to alterations in the interest of technical progress.
− All dimensions are given in millimetres.
− The illustrations are not true to scale.
Meaning of symbols
DANGER!
Safety notice indicating a danger that will directly result in
death or severe injury.
WARNING!
Safety notice indicating a danger that can result in death or
severe injury.
CAUTION!
Safety notice indicating a danger that can result in slight or
moderate injuries.
NOTICE
Safety notice indicating a danger that can result in damage
to property or in irreparable damage to the product
CHECK
Reference to a check that needs to be carried out
REFERENCE
Reference to separate documents that must be observed
 Instruction requiring action
− List, itemisation
Ô Reference to other sections of this document
2. Information in this document